STYLPRO LED Face Mask

Step into a new era of skincare innovation and let the glow up begin with the STYLPRO Wavelength LED Face Mask – where science meets beauty for a luminous transformation!

How to use the STYLPRO Wavelength LED Face Mask

  • Charging your mask

    - Insert the USB-C cable (provided) into the port at the top of the remote. Attach to a USB-C friendly power source. The battery icon will show a loading sequence on the remote when charging.

  • How to assemble your mask

    - Place the eye comfort pads into the eye holes and ensure they are securely attached.

    - Attach the straps into the loops at the side of the mask.

    - Place the mask onto your face and securely attach the straps around the crown of your head.

  • How to turn on

    - Once your remote is fully charged, plug the wire attached to the mask into the top of the remote.

    - Long press the On/Off button on the remote. This will turn on the mask.

  • Choose your mode

    - The mask has 4 modes.

    - Mode 1 is Anti-ageing.

    - Mode 2 is 'Target'.

    - Mode 3 is 'Recovery'.

    - Mode 4 is 'Balance'.

    - Once you have chosen your mode, enjoy your timed session.

  • How to turn off

    - After 10 minutes your mask will turn off automatically.

    - To turn off your mask before the 10 minute timer, long press the On/Off button.

  • How to clean

    - Wipe down the area of the mask that has come into contact with your skin with a disinfectant wipe after every single use.

Want to know more?

What are the modes

Mode 1: Anti-ageing

The Anti-ageing mode has red LED light with a wavelength of 633nm and
near-infrared light with a wavelength of 830nm. This mode provides a
rejuvenating and revitalizing experience for your skin. Red LED light can help
to stimulate collagen production, a protein responsible for younger looking
skin.

 

Mode 2: Target

The Target mode has blue LED light with a wavelength of 415nm. Blue LED
light helps target spots and blemishes leaving your complexion clearer.

 

Mode 3: Recovery

The Recovery mode has near-infrared with a wavelength of 830nm. Infrared
can help reduce inflammation and boost overall skin health.

 

Mode 4: Balance

The Balance mode is a combination of red LED light with a wavelength of 633nm, blue LED light with a wavelength of 415nm and near-infrared with a wavelength of 830nm. This mode can help to reduce inflammation, to stimulate collagen production and is the perfect mode for an overall boost for the skin. This mode
has the highest amount of light energy of all 4 modes.

Benefits

⭐Safe and natural
⭐Non-invasive
⭐Helps reduce appearance of fine lines and wrinkles
⭐Helps improve skin texture
⭐Spot and blemish control
⭐Customised skincare routine
⭐Time efficient sessions
⭐Versatile for all skin types

Features

⚡Red LED light (633nm)
⚡Blue LED light (415nm)
⚡Near Infrared (830nm)
⚡62mW/cm2 - 129 mW/cm2
⚡44J/cm2 - 77J/cm2
⚡4 different modes
⚡10 minute sessions
⚡Flexible silicone
⚡Rechargeable
⚡Remote to adjust modes
⚡Automatic timer
⚡User friendly controls

What do you get in the box?

✔️1 x Wavelength LED Face Mask
✔️1 x USB-C Cable
✔️1 x Silicone Eye Comfort Pads
✔️2 x Adjustable Mask Straps

FAQs: Heated Eye Massager

Hold down the power button to turn on the massager.

All 3 modes utilise thermo-therapy, which uses heat to help unblock glands above and below the eye, reducing itchiness, redness, and heaviness.

Mode 3 adds the vibration massage feature, which promotes increased lymphatic drainage by helping to increase circulation. As a result, the lids on the upper and lower eyes are visibly less red and swollen.

Mode 2 adds the LED red light feature, which encourages the regeneration of both collagen and elastin, two natural proteins that promote a smoother, youthful appearance in the skin.

Mode 1 utilises both additional features, encouraging all of the benefits of thermo-therapy, vibration massage and LED red light therapy.

Once you have turned on the device by holding down the power button, you can switch between the modes by pressing the power button with short clicks.

Press the ‘+’ and ‘-’ buttons to adjust the temperature as needed.

No, apply an eye cream or serum. Do not use the STYLPRO Heated Eye Massager on your skin without product.

No, apply an eye cream or serum. Do not use the STYLPRO Heated Eye Massager on your skin without product.

Red LED Light Therapy promotes the regeneration of collagen and elastin, encouraging smoother skin under the eyes.

Vibration massage increases circulation, promoting better lymphatic drainage to depuff above and below your eyes.

Thermo-therapy uses heat to help unblock glands above and below the eye, reducing itchiness, redness, and heaviness.

Yes, the STYLPRO Heated Eye Massager includes a charging cable.

Please check that your device is charged using the charging cable included. Hold the power button for 1-2 seconds to turn the device on. If your device is still not working, please contact our customer service team at teamtom@stylideas.com

When using on your lower or upper lid, place the tip of the massager next to corner of your eye. Then, gently glide it towards the outer corner of your eye. This should take around 15 seconds from the inner corner to the outer corner, giving time for the massager to heat your skin. Repeat this motion once or twice more, but do not use on the same patch of skin for more than 60 seconds.

You can download a copy of the instructions here